Blind-Spot Collision-Avoidance Assist Settings - Hyundai SX2 Owner's Manual

• Do not apply license plate frame or
objects, such as a bumper sticker, film
or a bumper guard near the rear corner
radar.
• Blind-Spot Collision Avoidance Assist
may not work properly if the bumper
has been replaced, or the surroundings
of the rear corner radar have been
damaged or paint has been applied.
• If a trailer, carrier, etc., is installed, it
may adversely affect the performance
of the rear corner radar or Blind-Spot
Collision Avoidance Assist may not
operate.
Blind-Spot
Collision-Avoidance Assist
settings
Blind-spot safety
2C_BlindSpotSafetySetInfo
With the vehicle on, select Settings >
Vehicle > Driver assistance > Driving
safety > Blind-spot safety from the
settings menu to set whether to use each
function.
• If "Blind-spot safety" is selected,
Blind-Spot Collision Avoidance Assist
warns the driver with a warning
message, an audible warning
depending on the collision risk levels.
Braking assist is applied for parking exit
depending on the collision risk levels.
2C_BlindSpotSafetyOffInfo
When the vehicle is restarted with
Blind-Spot Collision-Avoidance Assist off,
the "Blind-Spot Safety System is Off"
message will appear on the instrument
cluster.
If you select "Blind-spot safety", warning
light on the outside rearview mirror will
blink for three seconds. In addition, if the
vehicle is turned on, when "Blind-spot
safety" is selected, the warning light on
the outside rearview mirror blinks for
three seconds.
WARNING
The driver should always be aware of the
surroundings and drive safely. If
"Blind-spot safety" is deselected,
Blind-spot Collision Avoidance Assist
cannot assist you.
Information
If the vehicle is restarted, Blind-Spot
Collision-Avoidance Assist maintains the
last setting.
7
7-47