Dct Warning Messages - Hyundai SX2 Owner's Manual

Driving Your Vehicle
Paddle shifter (manual shift mode)
2C_PaddleShift
The paddle shifter is available when the
gear is in the D (Drive) position.
Pull the + or - paddle shifter once to shift
up or down one gear and the system
changes from automatic shift mode to
manual shift mode.
To change back to automatic shift mode
from manual shift mode, do one of the
followings:
• Pull and hold the + paddle shifter.
• Shift the gear to D (Drive).
The manual shift mode also changes back
to automatic shift mode in one of
following situations:
• When the accelerator pedal is gently
depressed for more than 6 seconds
whilst driving.
• When the vehicle speed decreases
below 4 mph (7 km/h).
Information
If the + and - paddle shifters are pulled at
the same time, gear shift may not occur.
6-22

DCT warning messages

Transmission overheated warning
If the warning messages on the cluster
continues to blink, we recommend that
you contact a HYUNDAI authorised
repairer.
Steep grade! Press brake pedal
2C_DCTWarningMessageInCluster
This message appears when the vehicle is
driving up hills or on steep grades.
If the vehicle is held or creeping forward
on an incline by applying the accelerator
pedal, the clutch and transmission may
result in damage.
Press the brake pedal, if the messages
appears on the cluster display.