Removable Towing Hook - Hyundai TUCSON Hybrid Owner's Manual

Table of Contents

Advertisement

Emergency situations
When towing your vehicle in an
emergency without wheel dollies:
1. Release EPB before turning off the
engine.
2. Place the ignition switch to the OFF
position.
3. Change the gear to N (Neutral) while
pressing the brake pedal.
4. Place the ignition switch to the ACC
position.
CAUTION
Failure to shift the gear to N (Neutral)
may cause internal damage to the
transmission.
8-34

Removable towing hook

1. Open the tailgate, and remove the
towing hook from the tool case.
Front
Rear
2. Remove the hole cover by pressing
the lower part of the cover on the
bumper.
3. Install the towing hook by turning it
clockwise into the hole until it is fully
secured.
4. Remove the towing hook and install
the cover after use.
ONX4080018
ONX4E080041

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tucson plug-in hybrid

Table of Contents