Hyundai SX2 Owner's Manual page 181

Resetting the power windows
If the power windows do not operate
normally, the automatic power window
system must be reset as follows:
1. Press the Engine Start/Stop button to
the ON position.
2. Close the window and continue pulling
up on the power window switch for at
least one second.
If the power windows do not operate
properly after resetting, we recommend
that you contact a HYUNDAI authorised
repairer.
WARNING
Make sure body parts or other objects are
out of the way before closing the
windows. The automatic reverse feature
does not operate whilst resetting the
power window system.
Automatic reversal
if equipped
2C_WindowEmergencyStop
If a window senses any obstacle whilst it
is closing automatically, it stops and
lowers about 12 inches (30 cm) to allow
the object to be cleared.
If the window detects any resistance
whilst the power window switch is pulled
up continuously, the window stops
upward movement and then lowers about
1 inch (2.5 cm).
If the power window switch is pulled up
continuously again within 5 seconds after
the window is lowered by the automatic
window reverse feature, the automatic
window reverse does not operate.
Information
The automatic reverse feature is active
only when the "Auto Up" feature is used
by fully pulling up the switch to the
second detent.
5
5-43