Hyundai SX2 Owner's Manual page 129

Vehicle is in N. Press START button,
shift to P and turn vehicle Off
This message appears if you try to turn off
the vehicle with the gear in N (Neutral).
To turn off the vehicle:
1. Press the Engine Start/Stop button. The
Engine Start/Stop button moves to the
ON position.
2. Shift the gear to P (Park).
3. Press the Engine Start/Stop button
again, then the vehicle turns off.
Low key battery
When the Engine Start/Stop button is
pressed to the OFF position, a message
may appear, indicating the internal
battery of the smart key is low. Replace
the smart key battery.
Press brake pedal to start engine
This message appears if the Engine
Start/Stop button is pressed repeatedly
without depressing the brake pedal.
Start the vehicle by depressing the brake
pedal and then pressing the Engine
Start/Stop button.
Key not in vehicle
This message appears if the smart key is
not in the vehicle when you have left the
vehicle with the Engine Start/Stop button
in the ON or Start position.
Always turn off the engine before leaving
your vehicle.
Press START button again
If you cannot start the vehicle after the
Engine Start/Stop button is pressed,
attempt to start the engine by pressing
the Engine Start/Stop button again.
If the warning message appears each
time you press the Engine Start/Stop
button, we recommend that your vehicle
be inspected by a HYUNDAI authorised
repairer.
Press START button with key
This message appears if the smart key is
not detected when you press the Engine
Start/Stop button after accessing with
the smart key.
Check BRAKE SWITCH fuse
This message appears if the brake switch
fuse is disconnected. Replace the fuse
before starting the engine.
If that is not possible, start the engine by
pressing the Engine Start/Stop button for
10 seconds in the ACC position.
4
4-27