Forward Collision-Avoidance Assist Settings - Hyundai SX2 Owner's Manual

CAUTION
Take the following precautions to
maintain optimal performance of the
detecting sensor:
• Never disassemble the detecting
sensor or sensor assembly, or cause
any damage to it.
• If the detecting sensors have been
replaced or repaired, we recommend
that your vehicle be inspected by a
HYUNDAI authorised repairer.
• Never install any accessories or stickers
on the front windscreen, or tint the
front windscreen.
• Exercise extreme caution to keep the
front view camera dry.
• Never place any reflective objects (for
example, white paper, mirror) over the
dashboard.
• Do not place any objects near the front
windscreen or install any accessories
on the front windscreen. It can affect
the performance of the defogging and
defrosting function of the climate
control system, which may prevent the
Driver Assistance systems from
operating.
• If a trailer or towbar mounted carrier is
attached, it may adversely affect the
performance of the Forward
Collision-Avoidance assist.
Forward Collision-Avoidance
Assist settings
Forward safety
2C_ForwardSafetySetInfo
With the vehicle on, select Settings >
Vehicle > Driver assistance > Driving
safety > Forward safety from the settings
menu in the infotainment system to set
whether to use each function.
• If "Forward safety" is selected,
Forward Collision-Avoidance Assist will
warn the driver with a warning
message, an audible warning
depending on the collision risk levels.
Braking assist will be applied
depending on the collision risk levels. If
"Forward safety" is deselected,
Forward Safety will turn off. The
warning light ( ) will illuminate on the
cluster.
WARNING
When the vehicle is restarted, Forward
Collision-Avoidance Assist will always
turn on. However, if "Forward safety" is
deselected, the driver should always be
aware of the surroundings and drive
safely.
7
7-5