Hyundai SX2 Owner's Manual page 379

Emergency Braking
2C_FCAJunctionTurningEmergencyBrakingInfo
To warn the driver that emergency
braking will be assisted, the "Emergency
Braking" warning message appears and
the ( ) warning light blinks on the cluster
with warning sound and haptic feedback
of the steering wheel (if equipped).
In emergency braking situation, braking is
assisted with strong braking power to
help prevent collision with the oncoming
vehicle.
• The function will operate when your
vehicle speed is between about 6-19
mph (10-30 km/h) and the oncoming
vehicle, powered two wheeler speed is
between about 19-44 mph (30-70
km/h).
Information
If the driver's seat is on the left side,
Junction Turning function will operate
only when you turn left. If the driver's seat
position is on the right side, the function
will operate only when you turn right.
Stopping vehicle and ending brake control
2C_DriveCarefullyInfo
• When the vehicle is stopped due to
emergency braking, the "Drive
carefully" warning message will appear
on the cluster.
For your safety, the driver should
depress the brake pedal immediately
and check the surroundings.
• Brake control will end after the vehicle
is stopped by emergency braking for
about 2 seconds.
Direct Oncoming function
Direct Oncoming function will warn and
control the vehicle depending on the
collision risk level: 'Collision Warning',
'Emergency Braking', and 'Stopping
vehicle and ending brake control'.
7
7-25