Hyundai SX2 Owner's Manual page 144

Convenience Features
Touch sensor type
2C_OutsideDoorHandleTouch_3
1. Close all doors, bonnet, and tailgate.
2. Have the smart key with you.
3. Touch the door handle touch sensor to
activate the door lock or press the Door
Lock button (1) on the smart key. The
hazard warning lights blink. Also, the
outside rearview mirrors fold if Settings
> Vehicle > Lights > Welcome
mirror/light > On door unlock or On
driver approach is selected from the
infotainment system.
4. Make sure the doors are locked by
pulling the outside door handle.
5-6
Information
• The door handle button or touch sensor
only operates when the smart key is
within 40 inches (1 m) from the outside
door handle.
• If you lock the doors using the door
handle button or touch sensor, the
doors are not locked under the
following circumstances:
- The Smart Key is in the vehicle.
- The Engine Start/Stop button is in the
ACC or ON position.
- Any door is open (except for the
tailgate).
If this occurs, a chime sounds for about
3 seconds. Check the vehicle before
attempting to lock the vehicle again.
Information
Before you leave your vehicle with the
Smart Key, verify that your vehicle is
locked. When using the touch sensor on
the front door handle, listen to hear that
the lock has actuated, and then pull the
handle within 3 seconds to confirm the
doors are locked.
(If it has been longer than 3 seconds,
verify the doors are locked by pressing
the lock button on the Smart Key. You can
hear a single beep.)