Resetting Tpms - Hyundai SX2 Owner's Manual

Emergency situations

Resetting TPMS

To reset TPMS:
1. Adjust all tyre pressure to the
recommended tyre inflation pressures.
2. Press the button on the steering
wheel with the vehicle parked and
engine running.
2C_ClusterMenuSwitch
3. Select Tyre Pressure on the cluster by
using the , (UP, DOWN) switch.
8-10
4. Press and hold the OK button on the
steering wheel, and select Set.
2C_TPMSReset
2C_TPMSResetSave
5. Check whether the "Standard tyre
pressures saved" message appears on
the cluster and the
blinks for about 4 seconds.
Information
• If the "Standard tyre pressures saved"
message on the cluster does not appear
or the warning light does not blink,
try again from Step 2.
• When "Set tyre pressures after parking
the vehicle" message appears on the
cluster, stop the vehicle and press and
hold the OK button again.
• For more information on the
recommended inflation pressure for
your vehicle, refer to the "Tyres and
wheels" section in chapter 2.
warning light