Hyundai SX2 Owner's Manual page 366

Driver Assistance System
Limitations of Forward
Collision-Avoidance Assist
Forward Collision-Avoidance Assist may
not operate properly, or it may operate
unexpectedly under the following
circumstances:
• The detecting sensor or the
surroundings are contaminated or
damaged
• The temperature around the front view
camera is high or low due to
surrounding environment
• The camera lens is contaminated due to
tinted, filmed or coated windscreen,
damaged glass, or sticky foreign
material (sticker, bug, etc.) on the glass
• Moisture is not removed or frozen on
the windscreen
• Washer fluid is continuously sprayed, or
the wiper is on
• Driving in heavy rain or snow, or thick
fog
• The field of view of the front view
camera is obstructed by sun glare
• Street light or light from an oncoming
traffic is reflected on the wet road
surface, such as a puddle on the road
• An object is placed on the dashboard
• Your vehicle is being towed
• The surrounding is very bright
• The surrounding is very dark, such as in
a tunnel, etc.
7-12
• The brightness changes suddenly, for
example when entering or exiting a
tunnel
• The brightness outside is low, and the
headlights are not on or are not bright
• Driving through steam, smoke or
shadow
• Only part of the vehicle, powered two
wheeler, and pedestrian or cyclist is
detected
• The vehicle in front is a bus, heavy
truck, truck with an unusually shaped
cargo, trailer, etc.
• The vehicle, powered two wheeler, in
front has no tail lights, tail lights are
located unusually, etc.
• The brightness outside is low, and the
tail lights are not on or are not bright
• The rear of the front vehicle is small or
the vehicle does not look normal, such
as when the vehicle is tilted,
overturned, or the side of the vehicle is
visible, etc.
• The front vehicle's ground clearance is
low or high