Hyundai SX2 Owner's Manual page 628

Maintenance
Headlight low beam
1C_HeadLampLowBeamRHD
(1) Vertical line of the left headlight bulb centre
(2) Car axis
(3) Vertical line of the right headlight bulb centre
(4) cut-off line of left headlamp
(5) cut-off elbow of left headlamp
(6) cut-off line of right headlamp
(7) cut-off elbow of right headlamp
(8) W1 (Low beam)
(9) H1 (High beam)
(10)Ground
1. Turn the low beam on without driver aboard.
2. The cut-off line should be projected in the cut-off line shown in the picture.
3. When aiming the low beam, vertical aiming should be adjusted after adjusting the
horizontal aiming.
4. If headlamp levelling device is equipped, adjust the head lamp levelling device switch
to "0".
9-62