Hyundai SX2 Owner's Manual page 82

Seats & Safety system
2. Connect the top tether strap hook to
the top tether anchorage, then tighten
the top tether strap according to the
instructions of your Child Restraint
System's manufacturer to firmly secure
the Child Restraint System.
3. Check the Child Restraint System is
secure by pushing and pulling the seat
forward and back and side-to-side.
WARNING
Take the following precautions when
installing the top tether anchorage:
• Read and follow all installation
instructions provided with your Child
Restraint System.
• Never attach more than one Child
Restraint System to a single ISOFIX top
tether anchorage. This could cause the
anchorage or attachment to come
loose or break.
• Only attach the top tether strap to the
correct top tether anchorage for that
seating position.
• Child Restraint System anchorages are
designed to withstand only those loads
imposed by correctly fitted Child
Restraint System.
Under no circumstances are they to be
used for adult seat belts or harnesses or
for attaching other items or equipment
to the vehicle.
3-42
Securing a Child Restraint System
with a lap/shoulder belt
When not using the ISOFIX system, all
Child Restraint Systems must be secured
to a rear seat using the lap/shoulder belt.
2C_ALRSeatBeltInstall
Installing a Child Restraint System with a
lap/shoulder belt
To install a Child Restraint System on the
rear seats:
1. Place the Child Restraint System on a
rear seat and route the lap/shoulder
belt around or through the Child
Restraint System, following the Child
Restraint System manufacturer's
instructions. Make sure the seat belt
webbing is not twisted.