Hyundai SX2 Owner's Manual page 293

Transmission temperature is high! Stop
safely
2C_DCTWarningMessageInCluster_2
Repeated stop-and-go launches on steep
grades, sudden take off or acceleration,
or other harsh driving conditions may
increase the clutch and transmission
temperature.
If the clutch and the transmission
temperature is high, the self-protection
mode warns you with a warning chime
and message whilst the shift indicator on
the cluster display blinks.
• Move the vehicle to a safe location and
shift the gear to P (Park) with the engine
running. Wait until the transmission is
sufficiently cooled down.
• If you ignore this warning, you may
experience abrupt shifts, frequent
shifts, or jerkiness.
Transmission hot! Park with engine On
2C_ShiftOverheatStopVehicleInfo
If you continue to drive with an
overheated transmission, the above
warning message appears, and the
self-protection mode disables the clutch.
• Move the vehicle to a safe location and
shift the gear to P (Park) with the engine
running. Wait until the transmission is
sufficiently cooled down.
• If the above warning message is
displayed continuously, we
recommend that you contact a
HYUNDAI authorised repairer.
Cooling... Remain parked for 00 min.
2C_DCTWarningMessageInCluster_3
If you move the vehicle to a safe location
and shift the gear to P (Park) with the
engine running, the above warning
message appears.
• Wait until the clutch is sufficiently
cooled down.
6
6-23