Enabling Or Disabling Tcp/Ip - Xerox WorkCentre 4118 System Administration Manual

Enabling or Disabling TCP/IP

At the WorkCentre 4118, perform these steps:
Press the [Machine Status] button.
1
2
Press
Admin Tools displays and press
[Enter].
If the System Admin Tools have
been passcode protected, type in
the password and press [Enter].
3
Press
Setup displays and press [Enter].
4
Press
Network displays and press
[Enter].
5
Press
displays and press [Enter].
Page 2-6
or until System
or until Network
or until Configure
or until TCP/IP
System Admin Tools
[Passcode Protect]
System Admin Tools
[Network Setup]
Network Setup
[Config. Network]
Config Network
[TCP/IP]
Xerox WorkCentre 4118 System Administration Guide