Xerox WorkCentre 4118 System Administration Manual page 48

4
Press
Setup displays and press [Enter].
5
Press
Network displays and press
[Enter].
Press
displays and press [Enter].
6
To enable or disable AppleTalk,
press
required setting, [On] or [Off]
displays and press [Enter].
NOTE: The WorkCentre 4118 will attach itself to the default zone of the local
segment where it is connected.
Install the Printer Driver (see "Printer Driver Installation" on page 5-5).
7
Page 5-4
or until Network
or until Configure
or until AppleTalk
or until the
System Admin Tools
[Network Setup]
Config. Network
[AppleTalk]
AppleTalk
[On]
Xerox WorkCentre 4118 System Administration Guide