Xerox WorkCentre 4118 System Administration Manual page 20

5
Press
Network displays and press
[Enter].
6
Press
displays and press [Enter].
You can use DHCP or BOOTP to
automatically configure TCP/IP
on the machine.
7
Press
required setting method displays
and press [Enter].
After a short period of time, the network will allocate the required addresses.
Print a System Data sheet to check the addresses (see the User Guide for printing reports).
8
Page 2-8
or until Configure
or until TCP/IP
or until the
Network Setup
[Config. Network]
Config Network
[TCP/IP]
TCP/IP
[DHCP]
Xerox WorkCentre 4118 System Administration Guide