Philips PM3320 Operating Manual page 99

FRONT NUMBER
FRONT
NUMBER
RECALL
ENTER >
FRO. 1.00
NEXT
PREVIOUS:
a] [S| [=]|[+] [>| {>| [=| [>
PROGRAM >
SSS
4-79E
If pushbutton FRONT No. is depressed, menu FRONT NUMBER will be
visible on the screen and the internal front setting memory can be controlled.
FRONT No 00.00 is the actual front.
The last used front number is visible in the softkey textarea and can be made
actual again.
In this front setting memory, a number of different fronts can be saved and
later on recalled. The number of fronts which can be programmed is
displayed when an ENTER menu is selected.
When memory back-up batteries are installed, all saved fronts remain in
memory after switching off the instrument.
Each front number contains a main front number and a sub front sequence
number.
main front number
sub front sequence number
Exampie: FRO. 00.01
MAIN.
FRONT MAIN
NUMBER FRONT SEQUENCE OF SUB FRONTS
i al
00 ot 02 03 04 05 06
or | FRONT | FRONT
01.00 | 01.01
00 o1 02
—
02 Q
$s
ee ae
Figure 4.35 Main and sub fronts.
wom
MAT 2097
By the RECALL, ENTER, NEXT and PREVIOUS actions, the actual front
setting is saved in a one level front setting back-up memory.
If required, the front setting which is saved in the back-up memory, can be
made actual again by entering <ENTER> <9999> <EXECUTE>.
After EXECUTE an automatic RECALL action is performed.