Philips PM3320 Operating Manual page 167

6.13
6.13.1
6.13.2
6.13.3
6.13.4
6.13.5
CHARACTERISTIC SPECIFICATION
POWER SUPPLY
Source voltage
ac. (r.m.s)
—Nominal 100 V ... 240 V
-Limits of 90 V ... 264 V
operation
Source frequency
-Nominal 50 Hz ... 400 Hz
-Limits of 45 Hz ... 440 Hz
operation
Source waveform
characteristics
-Max. waveform 10%
deviation factor
-Crest factor 1,27...1,56
Allowable power At least 20 ms
source interrup-
tion
Power consump-
tion (a.c. source)
-Nominal 160 W
6-19E
ADDITIONAL INFORMATION
@ Nominal source voltage.
@ Nominal source voltage.
After this time oscillo-
scope settings are saved
before instrument goes
down. Automatic power up
after restoration of Power
line voltage.
(For setting retention:
see 6.15.1).