Philips PM3320 Operating Manual page 91

5 ANALOG>
471E
Aiter selecting ANALOG, a copy of the screen is made
on-an: analog X-Y recorder.
During the PLOT action, the PLOT ANALOG menu is
dispiayed and a dot which moves from the left to the
right (over 10 divisions) is displayed in the bottom text
area of the screen to show the progress of the plot
action and a message
* 4% % * * * * PLOTTER ACTIVE * *# * # * * e*
Changes are possible after plotter has stopped.
is displayed.
The settings made with the Y=POSITION control, the
X-POSITION control and the X-EXPAND control re-
main.
Atthe end of the plot action the menu DISPLAY PLOT is
displayed again.
A PLOT action can be interrupted by pushing softkey STOP. The
DISPLAY PLOT menu is then displayed again.
After pushing softkey RETURN, the DISPLAY Rn POSITON menu is
PLOT
ANALOG
~ 4
- 2
[3]
= 4a
SCREEN
as s
~ 6
- 7
STOP 3
—————— ee
5 1 _
5 2 _
5 3 -
5 4 _
5 5 =
5 6 -
5 7 --
5 8 STOP
6 --
7 =
8 RETURN
displayed again.
RETURN
After pushing softkey RETURN, the DISPLAY menu is displayed again and the
selected register (e.g. R2) can still be positioned. This is indicated by the text POS
R2.
All modifications made between traces in X- as well as Y-direction (with the
exception of Y changes, which are made via the CHANNEL menu), are eliminated.