Philips PM3320 Operating Manual page 93

4-73E
4 A versus B>
If A versus B is selected, the DISPLAY A versus B menu is displayed.
One or more registers can be selected for A versus B display.
If a register is not selected for display, or if only one channel is
recorded in a register, the text Rn ON OFF is not displayed and A
versus B display is then not possible for this register.
DISPLAY If no register is displayed with two channels, A versus B is not
Aversus.B possible and the text A versus Bis not dispiayed and the function can
RO ON OFF 4 not be selected.
Rt ON OFF 2
R2 ON OFF 3
R3 ON OFF 4
at 5
ome 6
- ia
RETURN 8
pean aA oe
4 1 RO ON OFF
4 2 R1 ON OFF
4 3 R2 ON OFF
4 4 R3. ON OFF
One or more registers can be selected for A versus B display.
Depending on the selection the text ON or OFF is intensified.
Pushing the relevant softkey changes the situation from ON to OFF or reverse.
If the CURSORS were selected for the selected register, a message
Register in A versus B : no cursors possible.
is displayed and the cursors are switched off.
If a horizontal expand greater than *8 is selected via the MAGNIFY menu, a
message
Max. horizontal expand in A versus B is *8
is displayed and horizontal expand is set to *8.
4 5 =
4 6 _-
4 7 _
4 8 RETURN
After pushing softkey RETURN, the DISPLAY menu is displayed again. The
selections as made before remain unchanged.