Philips PM3320 Operating Manual page 96

4-76E
1 RO
2 Ri
3 R2
4 R3
The parameters of the selected register can be selected for display .in the bottom
text area.
Front information in the bottom text area, selected by softkey FRONT is not longer
displayed then,
Pushing the relevant softkey changes the situation from ON to OFF or reverse.
5 FRONT
With softkey FRONT, two extra lines with front pane! information are visible in the
bottom text area,
Register information in the bottom text area, selected by one of the softkeys RO, R1, See
R2 or R3 is not longer displayed then.
6 =
7 TEXT OFF
This text is only visible if full text is selected,
The bottom text area is blanked when softkey TEXT OFF is pushed.
8 RETURN
After pushing softkey RETURN, the DISPLAY menu is displayed again. The
selections as made before remain unchanged.
CHAN IDENT
After pushing sofikey CHAN IDENT, the channel identification (A and/or B) on the C.R.T.
screen can be switched. on or off.
Pushing this softkey changes the situation from ON to OFF or reverse, indicated by a high
or a low intensity of the text CHAN IDENT.