Philips PM3320 Operating Manual page 62

4-42E
4.2.8
CURSOR SECTION
[ow zaze wer sauce aoe 250 mate
ae
i
Figure 4.17 Front panel view.
dt...
av
This contro! functions when cursor operation is switched on via the
CURSORS SELECT menu and one of the registers is selected (Rn
A(B)) - (Rn ADD) or (Rn MUL) intensified).
Continuously variable control to determine the horizontal position of
the 1st cursor (always the most left cursor) on the screen.
Range lies between the most jeft and most right side of the trace
visible on the C.R.T. screen.
The adjusting speed increases after turning continuously in one
direction. After stopping, starting in the reverse direction resumes
with a slow adjusting speed.
This contro! functions when cursor operation is switched on via the
CURSORS SELECT menu and one of the registers is selected (Rn
A(B)) - (Rn ADD) or (Rn MUL) intensified).
Continuously variable contro! to determine the horizontal position of
the 2nd cursor {most right cursor) on the screen.
Range lies between the most left and most right side of the trace
visible on the C.R.T. screen.
The adjusting speed increases after turning continuously in one
direction. After stopping, starting in the reverse direction resumes
with a slow adjusting speed.
lf pushbutton CURSOR is pushed, the CURSORS SELECT menu is
displayed. See 4.2.8.1.
Calculation results are displayed in the top text area of the C.R.T.
screen.
dt time between the cursors.
AV. as voltage difference between the cursors.