Philips PM3320 Operating Manual page 88

4-68E
1 4 R3 ON OFF
One or more registers can be selected for display.
Depending.on the selection, the text ON or OFF is intensified. Pushing the relevant
softkey changes the situation from ON to OFF or reverse.
If a register is switched OFF, the POSITION controls which are eventually
addressed to this register, are from thatmoment on addressed to the next displayed
register.
If a register which is not yet displayed, is selected for display, the POSITION
controls are addressed to this register.
If cursors are selected, the cursors are on the selected register now.
1 5 --
1 6 =
1 7 _~
1 8 RETURN
After pushing softkey RETURN, the DISPLAY menu is displayed again. The
selected registers remain displayed.
2 POS Rn>
= Aslongas softkey POS Rnis not pushed, the text POS Rn is displayed
and the position of the selected register can be set with the VERTICAL
| | POSITION and HORIZONTAL POSITION control. The HORIZONTAL
POSITION control controls all other registers as well at the same
moment. The X-EXPAND control functions also for the selected
DISPLAY An | register.
POSITION
RO ani After selecting POS Rn, the DISPLAY Rn POSITION menu is
a —— displayed and the Y-POSITION control, the X-POSITION control as
(2 ] well as the X-EXPAND control can be assigned to one of the four
R2 Ts registers. The selected register number is intensified.
R3 (a7)
L4 Ifa register is not selected for display, this register can not be selected
| | for positioning.
CAUBRATE j 5 The text Rn for this register is then not displayed.
CHANNEL >
PLOT > 7
RETURN Te]
H
2 1 RO
2 2 Ri
2 3 R2
2 4 RS
The Y-POSITION, X-POSITION and X-EXPAND controls are addressed fo the
selected register.