Philips PM3320 Operating Manual page 101

481E
8 EXECUTE
By pressing softkey EXECUTE the selected front number is automatically recalled a
RETURN is performed resulting in the display of the FRONT NUMBER menu.
The number is tested against the real setting memory and if the number does not
exist a message or not may be selected, one of the following messages
Selected front doesn't exist.
Front numbers not changed.
or
Front 0 cannot be selected because it is
the actual front panel setting.
or
Front number cannot go beyond 99.
or
Selected tront doesn't exist.
Number set at last available front in sequence.
or
BACK UP FRONT cannot be changed. Action not executed.
can be displayed.
NEXT
if softkey NEXT is pushed, the next higher sub frontnumber of the selected sequence is
displayed in the softkey text area and made actual.
If NEXT goes to a number after the end of the sequence, the jirst frontin the sequence will
be made actual and a message
End of Sequence detected.
First front of sequence is selected.
is displayed.
lf a front does not exist, a message
Selected front doesn't exist.
Front numbers not changed.
is displayed.