Philips PM3320 Operating Manual page 149

6-1E
6.0 CHARACTERISTICS
A. General
This instrument has been designed and tested in accordance with IEC publication 348 for
Class | instruments.
This specification is valid after the instrument has warmed up for 30 minutes.
Properties expressed in numerical values with tolerances stated, are guaranteed by the
manufacturer.
Numerical values without tolerances are typical and represent the characteristics of an
average instrument.
Within 5 minutes after switching on, the temperature difference inside the instrument has
reached 70 percent of its end value.
B. Contents
6.1 Cathode ray tube
6.2 Signal acquisition
6.3 Channels A and B
6.4 Time base
6.5 Trigger
6.6 Memory
6.7 Display
6.8 Setting memory
6.9 Calculation facilities
6.10 Auto setting
6.11 Cursors
6.12 Calibrator
6.13 Power supply
6.14 Specification of options
6.15 Sundries
6.16 Mechanics
6.17. Environmentai
6.18 Safety
6.19 Accessories
6.20 Optional versions