Philips PM3320 Operating Manual page 80

4-60E
4.2.10. DISPLAY SECTION AND
MENU STRUCTURE
So hh oe 86
=)
Figure 4.27 Front panel view. "aun
venosition
X-pomirion
Ounce,
Continuously variable control giving vertical shift of one of the four
registers RO, R1, R2, R3 (including channels in the registers) can be
addressed via the DISPLAY menu.
The adjusting speed increases after turning continuously in one
direction. After stopping, starting in the reverse direction resumes
with a slow adjusting speed.
Continuously variable contro! giving horizontal shift of the total trace
display.
Can aiso be addressed to one of the four registers RO, R1, R2, R3
{including channels in the registers) as {ong as menu DISPLAY Rn
POSITION is selected.
The adjusting speed increases after turning continuously in one
direction. After stopping, starting in the reverse direction resumes
with a slow adjusting speed.
Continuously variabie control for horizontal expand of the total trace
display.
Can also be addressed to one of the four registers RO, R1, R2, R3
(including channels in the registers) as long as menu DISPLAY Rn
POSITION is selected.
The adjusting speed increases after turning continuously in one
direction. After stopping, starting in the reverse direction resumes
with a slow adjusting speed.
Pilot lamp indicating that the X-EXPAND function is active for one or
more registers. If the X-EXPAND control is fully turned anti clockwise,
the UNCAL pilot lamp is switched off.