Philips PM3320 Operating Manual page 78

4-58E
8 SELECT>
—___——__ If SELECT is selected, a selection can be made for a register, a plot
output speed and the penlift output polarity.
Only the registers which are selected for display, can be selected for
. plot actions.
PLOT
SELECT
RO 41
Rt 2 |
R2 a
R3 a
ANALOG >
RETURN 8
8 1 Ro
8 2 R1
8 3 R2
8 4 R3
Hard copies are made from the selected register.
8 5 ANALOG>
— =] | If ANALOG is selected, the PLOT SELECT ANALOG menu is
___--___________| | displayed and the plot output speed as well as the penlift
polarity can be selected.
PLOT SELCT
ANALOG
PEN UP "0" a
PEN UP "1" 2 7
- 3
cs 4
+ 20ms/DT
uP 5
DOWN 5
- 7
RETURN 8
8 5 1 PEN UP "0"
If the text PEN UP "0" is intensified, the instrument will generate a low level
TTL signal on its PENLIFT output