Replacing The Toner Cartridge - Xerox XC23 User Manual

XC23/XC33/XC33D User Guide

Replacing the toner cartridge

When the toner supply becomes low, the toner indicator flashes,
. You can continue to make copies until the toner indicator is
lit continuously and a J1 status code is displayed. When this
occurs the copier will not operate until the cartridge is replaced.
Use the following procedure to change the cartridge.
Note: For toner consumption information, refer to Toner
cartridge yield in this section.
Procedure:
1. Switch the copier off.
2. Open the copier front cover.
3. Place a sheet of paper on top of the cover to catch any
loose toner.
4. Press and hold the toner cartridge release button.
5. Rotate the empty cartridge in the direction of the arrow
until it stops.
6. Slide the cartridge out gently.
Note: Help the environment by recycling your used
toner cartridges. Refer to the XEROX green team
brochure packed with the toner cartridges for instructions
on how to return the used cartridges to XEROX.
Copier care
75