Customizing Your Copier; Identifying The Special Features - Xerox XC23 User Manual

Customizing your copier

Customizing your copier
Special feature
Tray
This default sets the tray that is selected when the copier is in the
normal copy mode or when the Clear all button is pressed.
Automatic clear
This default allows you to activate or deactivate the time (60
seconds) it takes the copier to return to the normal copy mode after
the copy cycle is complete.
Auto tray switch
This default allows you to activate or deactivate the copier from
automatically switching to two or more trays loaded with the same
paper size for continuous feeding.
Power saver
This default allows you to change the period of idle time required for
the copier to go into the low power mode.
Copy cartridge life
This displays the remaining drum cartridge life on the message
display.
Enable accessory kits
Enables the Card Reader (XEROX or 3
66
The XC23/XC33/XC33D copier allows you to customize the
special features. The special features contain various copier
settings that are set in the factory.
This section provides a description of the special feature settings
and how to change them.

Identifying the special features

rd
party)
Program Option number and option
Number (default is in bold)
20 Bypass
Tray 1
Tray 2
Tray 3
Tray 5
Auto
21 0 - Deactivate
1 - Activate
0 - Deactivate
22
1 - Activate
24 0 - deactivate
1 - 4min.
2 - 6min.
3 - 10min.
4 - 18min.
5 - 32min.
6 - 62min.
7 - 122min.
8 - 242min.
9 - 482min.
81 N/A
91 0 - Deactivate
1 - Activate
XC23/XC33/XC33D User Guide