Identifying The Control Panel Components - Xerox XC23 User Manual

Getting to know your copier




Added features area
Note: To select a feature in the added feature area, press the button below the feature.
Special features: Select this feature to access, view, or change the copier default settings.
Stapling: Select this feature to automatically staple and collate copy sets; the copy sets are
Collated: Select this feature to collate the output copies. This feature is enabled only on
Book mode: Select this feature to copy both pages of an open book or magazine.
Margin shift: Select this feature in order to produce a left-binding margin on the copy.
Edge deletion: Select this feature to delete any unwanted images from the edge of the copy.

Originalcopy area (XC33D only)
Originalcopy button: Press this button to select the desired copy output option.
21: Select this option for one-sided copies from two-sided originals.
22: Select this option for two-sided copies from two-sided originals.
12: Select this option for two-sided copies from one-sided originals.
11: Select this option for one-sided copies from one-sided originals.
12

Identifying the control panel components

The control panel contains buttons and indicator lights which
control and display the conditions of the copier.
When an indicator light becomes lit, this informs you of your
control panel selections.

delivered to the sorter/stapler. This feature is enabled only on machines with the 10-
bin sorter stapler.
machines which have the 10-bin sorter stapler option.
XC23/XC33/XC33D User Guide