Job Interrupt - Xerox XC23 User Manual

XC23/XC33/XC33D User Guide

Job interrupt

Select this feature when you need to interrupt the job you are
running to perform a different job, and desire to go back to
the first running job without reprogramming it.
Note: You cannot interrupt a copy job that has the auto
stapling feature selected,
Procedure:
1. Press the Interrupt button,
to come to a complete stop.
Note: If you are using the ADF/DADF some uncopied
originals may be delivered to the original catch tray.
2. Remove your original from the document glass or unload
the uncopied originals from the ADF/DADF and place in
a convenient location.
3. If you are using the ADF/DADF, remove the copied
originals from the original catch tray making sure they do
not get mixed up with the uncopied originals.
4. Place the second copy job original on the document
glass or in the ADF/DADF.
5. If needed, select the desired basic and/or added copying
features.
(Refer to the sections entitled How to use the basic
copying features or How to use the added copying
features .)
6. Enter the copy quantity.
7. Press the Start button,
8. Press the Interrupt button,
9. Remove the second copy job original and copies.
10. Replace your original on the document glass or reload all
uncopied originals from the first copy job into the
ADF/DADF. Ensure the uncopied original order
sequence is correct.
11. Press the Start button,
How to use the basic copying features
.
and wait for the copier
.
.
.
57