Xerox XC23 User Manual page 80

Copier care
76
7. Unpack the new toner cartridge and shake it several
times.
Note: Do not pull the protective seal off at this time.
8. Place the new cartridge on the holder and insert the tab
on the end of the cartridge into the cutout.
9. While holding the cartridge with the protective seal up in
one hand, remove the seal toward you and slide in the
cartridge halfway.
10. When you have peeled the seal as far as the line
position, fold back the seal and remove the folded seal
toward you.
11. Hold the tab and push the cartridge all the way in, then
rotate it counterclockwise until it clicks.
Note: You can not rotate the cartridge until it is pushed
in all the way.
12. Remove the sheet of paper on the copier front cover.
13. Switch the copier on.
14. Ensure the toner indicator is off,
Note: If the toner indicator did not turn off, do not pull
the cartridge out and try to reinsert it. Please call 1-800-
TEAM-XRX (in the United States and Canada) for further
assistance.
.
XC23/XC33/XC33D User Guide