Margin Shift - Xerox XC23 User Manual

How to use the added copying features
64

Margin shift

Select this feature to move the copy image to the right and
leave a staple or punch margin on the left edge of the copy.
Note: The factory default is set to a 10mm margin shift. To
change the default, refer to the section entitled Customizing
your copier.
Procedure:
1. Ensure your originals are loaded in the appropriate
copier location.
2. Press the Margin shift button,
Note: The bypass tray can not be selected.
3. If required, select the desired basic and/or added
copying features.
(Refer to the sections entitled How to use the basic
copying features or How to use the added copying
features.)
4. Enter the copy quantity.
5. Press the Start button,
.
.
XC23/XC33/XC33D User Guide