Making Copies With Mixed-Size Originals - Xerox XC23 User Manual

Making copies
34

Making copies with mixed-size originals

The ADF and DADF allows you to copy a stack of originals which
contain different paper sizes (this stack of originals must be on
standard paper stock).
Note: In order to copy a stack of originals which contain different
paper sizes, you must activate the "Multisheet feeder mixed
sizes" special feature (program 32). Refer to the section entitled
Customizing your copier in order to activate this copier setting.
Procedure:
1. Align the originals at edges A and B (as shown in the
illustration to the left).
2. Raise the original catch tray.
3. Place the stack of originals, face up , in the ADF/DADF;
ensure that the stack of originals is in the SEF direction.
4. Lower the original catch tray.
Note:


In order to have each copy on the same paper
size as each original, select 100% and select the
paper supply auto option.


In order to have all the copies on the same
paper size, select the reduce/enlarge auto
option and then select a specific paper tray (not
auto).


The bypass tray cannot be selected for this copy
operation.
5. Select the desired basic and/or added copy features.
(Refer to the sections entitled How to use the basic
copying features or How to use the added copying
features .)
6. Enter the copy quantity.
Note: 99 maximum for 1
1 and 2
1 copying
30 maximum for 1
2 and 2
2 copying
7. Press the Start button, .
XC23/XC33/XC33D User Guide