Edge Deletion - Xerox XC23 User Manual

XC23/XC33/XC33D User Guide

Edge deletion

Select this feature to delete unwanted images on the edge of
a copy (example: punched holes).
Note: The factory default is set to a 10mm edge deletion.
To change the default, refer to the section entitled
Customizing your copier .
Procedure:
1. Ensure your originals are loaded in the appropriate
copier location.
2. Press the Edge deletion button,
Note: The bypass tray can not be selected.
3. If required, select the desired basic and/or added
copying features.
(Refer to the sections entitled How to use the basic
copying features or How to use the added copying
features .)
4. Enter the copy quantity.
5. Press the Start button,
How to use the added copying features
.
.
65