E1-E3 - Xerox XC23 User Manual

Problem solving
96

E1-E3

E codes appear whenever the copier has trouble feeding a sheet
of paper inside the copier or trouble feeding paper through the
copier exit area.
1. Open the copier front cover.
2. Lift up on the copier release lever and open the copier.
3. If the lead edge of the misfed paper is accessible from
the copy output tray, pull the paper out toward the tray.
Caution: The fuser area is extremely hot, allow the
machine to cool before removing the misfed paper.
4. If the trail edge of the misfed paper is accessible from
the inside, pull it out toward the bypass tray.
5. If the misfed paper is in the location shown in the figure
to the left, pull it out in the direction of the arrow.
Note: To help prevent copy quality problems, never
touch the shiny surface of the drum.
XC23/XC33/XC33D User Guide