XDL23/XDL33/XDL33D User Guide
Edge deletion
Select this feature to delete unwanted images on the edge of
a copy (example: punched holes).
Note: The factory default is set to a 10mm edge deletion.
To change the default, refer to the section entitled
Customizing your copier.
Procedure:
1. Ensure your originals are loaded in the appropriate
copier location.
2. Press the Edge deletion button,
Note: The bypass tray can not be selected.
3. If required, select the desired basic and/or added
copying features.
(Refer to the sections entitled
copying features
features.)
4. Enter the copy quantity.
5. Press the Start button,
How to use the added copying features
How to use the basic
or
How to use the added copying
.
.
65