Edge Erase - Xerox DocuColor 12 System Administration Manual

1
This option allows you to set the Edge Erase
default to eliminate the shadows that are caused
by the document edges during the copying
process.
This feature offers two options, as illustrated in
Figure 29:
2
•
•
3
When you are making 2-sided copies, Edge Erase
4
is applied to both sides of the output.
5
6
7
TOOLS MODE

Edge Erase

No Erase — Uses 2 mm default
Variable Erase to display an additional screen
with variable shift settings.
Under the Top & Bottom icon, touch the up
arrow to increase the amount of erasure at
the top and bottom edges. Touch the down
arrow to decrease the amount of erasure at
the top and bottom edges.
Under the Left & Right icon, touch the up
arrow to increase the amount of erasure at
the left and right edges. Touch the down
arrow to decrease the amount of erasure at
the left and right edges.
Figure 29: Edge Erase screen with
Input Erase Value selected
3–22 DOCUCOLOR 12 SYSTEM ADMINISTRATION GUIDE