Networkservices Http Proxy Mode; Networkservices Http Proxy Pacurl; Networkservices Http Proxy Password; Networkservices Http Proxy Url - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

NetworkServices HTTP Proxy Password

This is the password part of the credentials for authentication towards the HTTP proxy.
Requires that the NetworkServices HTTP Proxy Mode is set to Manual.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0, 64)
The authentication password.

NetworkServices HTTP Proxy Mode

You can configure a device that is registered to the Cisco Webex cloud service to use a
proxy server for HTTPS and WebSocket traffic. The HTTP proxy for Cisco Webex can be
set up manually, it can be auto-configured (PACUrl), fully automated (WPAD), or it can be
turned off.
If the device is registered to an on-premise service such as CUCM or VCS, keep this
setting Off.
Requires user role: ADMIN, USER
Default value: Off
Value space: Manual/Off/PACUrl/WPAD
Manual: Enter the address of the proxy server in the NetworkServices HTTP Proxy
URL setting. Optionally, also add the HTTP proxy login name and password in the
NetworkServices HTTP Proxy LoginName/Password settings.
Off: The HTTP proxy mode is turned off.
PACUrl: The HTTP proxy is auto-configured. You must enter the URL for the PAC (Proxy
Auto Configuration) script in the NetworkServices HTTP Proxy PACUrl setting.
WPAD: With WPAD (Web Proxy Auto Discovery) the HTTP proxy is fully automated and
auto-configured.
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration Peripherals Maintenance

NetworkServices HTTP Proxy Url

Set the URL of the HTTP proxy server. Requires that the NetworkServices HTTP Proxy
Mode is set to Manual.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0..255)
The URL of the HTTP proxy server.

NetworkServices HTTP Proxy PACUrl

Set the URL of the PAC (Proxy Auto Configuration) script. Requires that the
NetworkServices HTTP Proxy Mode is set to PACUrl.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0..255)
The URL of the PAC (Proxy Auto Configuration) script.

NetworkServices HTTPS OCSP Mode

Define the support for OCSP (Online Certificate Status Protocol) responder services. The
OCSP feature allows users to enable OCSP instead of certificate revocation lists (CRLs) to
check the certificate status.
For any outgoing HTTPS connection, the OCSP responder is queried of the status. If the
corresponding certificate has been revoked, then the HTTPS connection will not be used.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: Disable OCSP support.
On: Enable OCSP support.
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
133
Administrator Guide
Device settings Device settings Appendices