Cisco TelePresence SX10 Quick Set Administrator's Manual page 62

Cisco TelePresence SX10 Quick Set

Introduction
Set up ad hoc multipoint conferences
Conference
MultiSite Remote
Multipoint Mode
option key device type
setting
MCU
Off 3 N/A
Video device
CUCM-
MediaResource- N/A Video device
GroupList
Yes N/A
MultiSite 3
No N/A
MCU
Yes
Video device
Auto
MCU
No
Video device
The remote device type is sown in the Call [n] DeviceType status.
2
Not supported for SX10, DX70, and DX80.
3
We recommend setting Conference Multipoint Mode to Auto rather than to MultiSite in order to avoid cascaded conferences.
4
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration Peripherals
(page 2 of 2)
Add participant behavior
2
• If the MCU supports Add Participant, there is an Add button in the UI and you can call the next participant directly.
The new participant is added to the conference as soon as he accepts the call.
Direct Remote Add
• If the MCU does not support Add Participant, there is no Add button in the UI.
• You can add one extra participant on audio-only.
Plus one audio
• You cannot add more participants on video.
• Available only to CUCM registered devices, and the SIP Type setting must be Cisco.
• The conference is put on hold while calling a new participant. When the new particiant accepts the call you can
Consultative Add
merge the new call with the conference.
• Only the participant who added the first new participant to the conference can add more participants.
• There is an Add button in the UI, and you can call the next participant directly.
Local Multisite
4
• You can keep adding participants until you reach the maximum number for the device.
• You can add one extra participant on audio-only.
Plus one audio
• You cannot add more participants on video.
• If the MCU supports Add Participant, there is an Add button in the UI and you can call the next participant directly.
The new participant is added to the conference as soon as he accepts the call.
Direct Remote Add
• If the MCU does not support Add Participant, there is no Add button in the UI.
• There is an Add button in the UI, and you can call the next participant directly.
Local Multisite • You can keep adding participants until you reach the maximum number for the device.
without cascading 4
• Only the MultiSite host (which is now acting as an MCU) can add participants. This prevents cascaded
conferences.
• If the MCU supports Add Participant, there is an Add button in the UI and you can call the next participant directly.
The new participant is added to the conference as soon as he accepts the call.
Direct Remote Add
• If the MCU does not support Add Participant, there is no Add button in the UI.
• You can add one extra participant on audio-only (not supported for SX10, DX70, and DX80).
Plus one audio
• You cannot add more participants on video.
Maintenance
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
62
Administrator Guide
Device settings Appendices Appendices