Cisco TelePresence SX10 Quick Set Administrator's Manual page 28

Cisco TelePresence SX10 Quick Set

Introduction Introduction
NetworkServices SNMP SystemContact
OLD: User role: ADMIN
NEW: User role: ADMIN, INTEGRATOR
NetworkServices SNMP SystemLocation
OLD: User role: ADMIN
NEW: User role: ADMIN, INTEGRATOR
UserInterface ContactInfo Type
(SX10, DX70, DX80)
OLD: Value space: Auto / DisplayName / IPv4 / IPv6 / None / SipUri / SystemName
NEW: Value space: Auto / DisplayName / E164Alias / H320Number / H323Id / IPv4 /
IPv6 / None / SipUri / SystemName
Video Output Connector [1] CEC Mode
(SX10)
OLD: Default value: Off
NEW: Default value: On
Video Output Connector [3] Resolution
(SX80)
OLD: User role: ADMIN, INTEGRATOR
NEW: User role: ADMIN, INTEGRATOR, USER
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration Peripherals
(All products)
(All products)
Maintenance
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
28
Administrator Guide
Device settings Appendices