Upgrade The Device Software - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Upgrade the device software

Upgrading from TC to CE software
CE software is the evolution of TC software. We recommend
that you upgrade to TC7.3.6 or later before you upgrade to CE
software.
It is important that you read about upgrade requirements and
functionality changes before you upgrade to CE software.
Also check that your environment supports the changes. We
recommend reading the Software Release Notes carefully.
If you don't take into account these considerations, upgrading to
CE can leave you with a non-functioning deployment that requires
you to downgrade.
* CE software does not support the
following features and products:
- CTMS conferencing
- MediaNet
- Displays that do not support 16:9
resolution
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration Peripherals
(page 1 of 2)
Upgrading from CE8 to CE9
The MultiStream feature with Cisco TelePresence Server is
deprecated in CE9.
Also, some features that were available from the Touch controller
in CE8, are not available in the first CE9 releases. Read the
Software Release Notes for details before you upgrade.
No
Upgrade to TC7.3.6 or later
Yes
Use TC7.x software
Update your application
Yes
to the new API commands
before installing CE9
Maintenance Maintenance
Is your device
TC
running TC7.3.6 or
later?
Yes
Do you need TC
features that are
not supported in CE
software?
*
No
Are you currently
using the API (for
example Crestron or
AMX)?
No
83
Device settings
Install CE9?
Which software
version is the device
running?
CE
Do you need
Yes
MultiStream with
Cisco TelePresence
Server?
No
Install CE9
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices
Use CE8.x software