Userinterface Features Share Start; Userinterface Language; Userinterface Osd Encryptionindicator; Userinterface Osd Halfwakemessage - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

UserInterface Features Share Start

Choose whether or not to remove the default buttons and other UI elements for sharing and
previewing content, both in call and out of call, from the user interface. The setting removes
only the buttons and UI elements, not their functionality as such. You can share content
using Proximity or the Cisco Webex Teams app still.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
Value space: Auto/Hidden
Auto: Shows the default buttons and UI elements in the user interface.
Hidden: Removes the default buttons and UI elements from the user interface.

UserInterface Language

Select the language to be used in the user interface. If the language is not supported, the
default language (English) will be used.
Requires user role: ADMIN, USER
Default value: English
Value space: Arabic/Catalan/ChineseSimplified/ChineseTraditional/Czech/Danish/Dutch/
English/EnglishUK/Finnish/French/FrenchCanadian/German/Hebrew/Hungarian/Italian/
Japanese/Korean/Norwegian/Polish/Portuguese/PortugueseBrazilian/Russian/Spanish/
SpanishLatin/Swedish/Turkish
Select a language from the list.
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration Peripherals Maintenance

UserInterface OSD EncryptionIndicator

Define for how long the encryption indicator is shown on screen. The icon for encrypted
calls is a locked padlock.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/AlwaysOn/AlwaysOff
Auto: If the call is encrypted, a "Call is encrypted" notification is shown for 5 seconds.
Then, an encryption indicator icon is shown for the rest of the call.
If the call is not encrypted, a "Call is not encrypted" notification is shown for 5 seconds.
No encryption indicator icon is shown.
AlwaysOn: The "Call is encrypted" notification is shown for 5 seconds. Then, an
encryption indicator icon is shown for the rest of the call.
AlwaysOff: The encryption indicator is never displayed on screen.

UserInterface OSD HalfwakeMessage

A custom message can be displayed in the middle of the main screen when the device is
in the half wake state. The custom message will replace the default message, which gives
instructions how to start using the device. You can also delete the default message, without
adding a custom message.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 128)
The custom message. An empty string: Restore the default message. A space only:
There will be no message at all.

UserInterface OSD Output

Define on which monitor on-screen information and indicators (OSD) should be displayed.
If the device is controlled with a remote control also the on-screen menus appear on this
monitor.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
Value space: 1
1: The device sends the on-screen information to the connected monitor.
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
164
Administrator Guide
Device settings Device settings Appendices