Networkservices Ssh Allowpublickey; Networkservices Ssh Hostkeyalgorithm; Networkservices Ssh Mode; Networkservices Telnet Mode - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

NetworkServices SSH Mode

The SSH (or Secure Shell) protocol can provide secure encrypted communication between
the video conferencing device and your local computer.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The SSH protocol is disabled.
On: The SSH protocol is enabled.

NetworkServices SSH HostKeyAlgorithm

Choose the cryptographic algorithm that shall be used for the SSH host key. Choices
are RSA (Rivest–Shamir–Adleman) with 2048 bits keysize, ECDSA (Elliptic Curve Digital
Signature Algorithm) with NIST curve P-384, and EdDSA (Edwards-curve Digital Signature
Algorithm) with ed25519 signature schema.
Requires user role: ADMIN
Default value: RSA
Value space: ECDSA/RSA/ed25519
ECDSA: Use the ECDSA algorithm (nist-384p).
RSA: Use the RSA algorithm (2048 bits).
ed25519: Use the ed25519 algorithm.

NetworkServices SSH AllowPublicKey

Secure Shell (SSH) public key authentication can be used to access the device.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The SSH public key is not allowed.
On: The SSH public key is allowed.
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration Peripherals Maintenance

NetworkServices Telnet Mode

Telnet is a network protocol used on the Internet or Local Area Network (LAN) connections.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: The Telnet protocol is disabled. This is the factory setting.
On: The Telnet protocol is enabled.

NetworkServices UPnP Mode

Fully disable UPnP (Universal Plug and Play), or enable UPnP for a short time period after
the video conferencing device has been switched on or restarted.
The default operation is that UPnP is enabled when you switch on or restart the video
conferencing device. Then UPnP is automatically disabled after the timeout period that is
defined in the NetworkServices UPnP Timeout setting.
When UPnP is enabled, the device advertises its presence on the network. The
advertisement permits a Touch controller to discover video conferencing devices
automatically, and you do not need to manually enter the device's IP address in order to pair
the Touch controller.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: UPnP is disabled. The video conferencing device does not advertise its presence,
and you have to enter the device's IP address manually in order to pair a Touch controller
to the device.
On: UPnP is enabled. The video conferencing device advertises its presence until the
timeout period expires.
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
137
Administrator Guide
Device settings Device settings Appendices