Video Presentation Defaultpipposition; Video Presentation Defaultsource; Video Selfview Default Fullscreenmode; Video Selfview Default Mode - Cisco DX70 Administrator's Manual

Cisco DX70 and DX80

Introduction

Video Presentation DefaultPIPPosition

Define the position on screen of the presentation picture-in-picture (PiP). The setting only
takes effect when the presentation is explicitly minimized to a PiP, for example using the
user interface. The setting takes effect from the next call onwards; if changed during a call,
it will have no effect on the current call.
Requires user role: ADMIN
Default value: Current
Value space: Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/
LowerLeft/LowerRight
Current: The position of the presentation PiP will be kept unchanged when leaving a call.
UpperLeft: The presentation PiP will appear in the upper left corner of the screen.
UpperCenter: The presentation PiP will appear in the upper center position.
UpperRight: The presentation PiP will appear in the upper right corner of the screen.
CenterLeft: The presentation PiP will appear in the center left position.
CenterRight: The presentation PiP will appear in the center right position.
LowerLeft: The presentation PiP will appear in the lower left corner of the screen.
LowerRight: The presentation PiP will appear in the lower right corner of the screen.

Video Presentation DefaultSource

Define which video input source to use as a default presentation source. This setting may
be used by the API and 3rd party user interfaces. It is not relevant when using the user
interfaces provided by Cisco.
Requires user role: ADMIN, USER
Default value: 2
Value space: 2
The video input source to use as default presentation source.
D15362.02 DX70 and DX80 Administrator Guide CE8.3, JANUARY 2017.
Configuration Peripherals Maintenance

Video Selfview Default Mode

Define if the main video source (self-view) shall be displayed on screen after a call. The
position and size of the self-view window is determined by the Video Selfview Default
PIPPosition and the Video Selfview Default FullscreenMode settings respectively.
Requires user role: ADMIN
Default value: Current
Value space: Off/Current/On
Off: self-view is switched off when leaving a call.
Current: self-view is left as is, i.e. if it was on during the call, it remains on after the call; if
it was off during the call, it remains off after the call.
On: self-view is switched on when leaving a call.

Video Selfview Default FullscreenMode

Define if the main video source (self-view) shall be shown in full screen or as a small
picture-in-picture (PiP) after a call. The setting only takes effect when self-view is switched
on (see the Video Selfview Default Mode setting).
Requires user role: ADMIN
Default value: Current
Value space: Off/Current/On
Off: self-view will be shown as a PiP.
Current: The size of the self-view picture will be kept unchanged when leaving a call, i.e.
if it was a PiP during the call, it remains a PiP after the call; if it was fullscreen during the
call, it remains fullscreen after the call.
On: The self-view picture will be shown in fullscreen.

Video Selfview Default OnMonitorRole

Define which monitor to display the main video source (self-view) on after a call. Note that
this video system has only one monitor, so this value is fixed and cannot be changed.
Requires user role: ADMIN
Default value: First
Value space: First
First: The self-view picture will be shown on the integrated screen.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
115
Administrator Guide
System settings System settings Appendices