Sample Set - Xerox CopyCentre C32 Quick Reference Manual

Spode QRG.book Page 30 Tuesday, May 13, 2003 10:51 AM

Sample Set

This feature is used to review the output to ensure that it is exactly what is required
prior to printing a large quantity.
Options:
The feature is switched off.
O
FF
Use to enable the Sample Set feature. One complete set of the job will be printed.
O
N
To print the remainder of the job, press the Job Status button and select your job in
the queue.
If the output is acceptable, select Release, the job will be completed.
If the output was not acceptable or the job is no longer required, select Delete to
delete the job from the queue. Reprogramme and rescan the entire job.
P 3-30
AGE
X C C /W C
EROX OPY ENTRE ORK ENTRE
P 32/40 C Q R
RO OLOUR UICK EFERENCE
G
UIDE