Emptying The Punch Scrap Container - Xerox Document Centre 706 Series User Manual

Emptying the Punch Scrap
Container
When the optional finisher with the puncher is installed, the following
messages will be shown on the display when the punch scrap container is
full. Follow the steps to dispose of the scraps in the container.
Each time you pull the punch scrap container out from the machine, make
sure that all the scraps are emptied before you put the container back.
You should remove the container while the power is on. If you switch off the
power and empty the scrap container, the machine will not be able to detect
that the container has been removed and the scraps disposed of.
Procedure
Open the front door of the
finisher.
Pull the punch scrap
container out in the
direction of the arrow.
G
Daily Care
Close

8-7 Emptying the Punch Scrap Container

G
8
215