Start-Up; Indications - EMS DOLORCLAST FT-245 Instructions For Use Manual

4. START-UP

The safety glasses provided for both the user and
the patient must be put on prior to starting laser
delivery.
All automatic programs must be used with the
handpiece correctly mounted on the clamp of the
arm (optional), which in turn is correctly mounted
on the cart (optional). The end of the handpiece
(lens end) must be supported within the spacer,
taking care to align the groove on the handpiece
with the protrusion inside the clamp of the arm.
The spacer must be supported on the patient's
skin in the area to be treated (see tutorial photo).
Use of automatic programs other than as indicated
may cause burns to the patient.
For treatment in manual mode, the user must
hold the handpiece on the patient's skin and
'brush' the treatment area, moving at a speed of
1 cm/sec. Use of manual programs other than as
indicated may cause burns to the patient.
1. Turn on the machine by turning the ignition key to
position I (Figure 3).
2. The console automatically performs a series of
diagnostic tests that are not shown on the screen.
In the event of an error message, please refer to
the troubleshooting information provided on the
screen or in the troubleshooting section of this
manual.
3. The console is ready for use when all diagnostic tests
have been completed successfully.
4. After this stage, the screen chosen in the 'Settings'
preferences pages will appear: 'Indications' or
'Actions'.
5. To turn off the machine, turn the ignition key to position
O (Figure 3).
00_FB-1007_16_rev_C_DOLORCLAST High Power Laser_EMS.indb 11 00_FB-1007_16_rev_C_DOLORCLAST High Power Laser_EMS.indb 11

4.1. INDICATIONS

The 'Indications' screen is shown below. The image of
a human body will appear on the left with relevant text
indicating the treatable areas; the conditions associated
with each area will appear on the right.
Figure 4
When clicking on the part to be treated or the name,
the area is highlighted in blue and the section on the right
displays the possible protocols associated with the area
(treatable conditions).
When clicking on the condition, a page will appear
showing a choice between 'Automatic and Manual',
where the type of treatment must be selected. The 'home'
icon can be clicked to return to the homepage, or the
'back' button returns the user to the previous screen.
Figure 5
Once the selection has been made, the page containing
images that illustrate the area to be treated based on the
condition chosen will be displayed.
11
7/9/2021 9:53:31 AM 7/9/2021 9:53:31 AM