Technical Specifications - EMS DOLORCLAST FT-245 Instructions For Use Manual

12. TECHNICAL SPECIFICATIONS

The laser source of the FT-245 is comprised of 3 laser diodes that emit infrared (IR) and a laser diode that emits a
red guide light.
MANUFACTURER
MODEL
MDD 93/42/EEC CLASSIFICATION
EN 60601-1 CLASSIFICATION
IEC 60529 CLASSIFICATION
Radiation specifications for the IR sources:
IR LASER SOURCE CLASS (EN 60825-1:2007-10)
WAVELENGTH
PEAK POWER AT HANDPIECE
INSTANTANEOUS PEAK POWER AT HANDPIECE
PULSE DURATION
PEAK AVERAGE POWER
REPETITION RATE
PEAK MODULATION
TREATMENT DURATION
NOMINAL OCULAR HAZARD DISTANCE (NOHD)
Radiation specification for the guide light:
GUIDE LIGHT LASER SOURCE CLASS (EN 60825-1:2007-10)
WAVELENGTH
POWER
00_FB-1007_16_rev_C_DOLORCLAST High Power Laser_EMS.indb 23 00_FB-1007_16_rev_C_DOLORCLAST High Power Laser_EMS.indb 23
GN MED SRL Via Bentivoglio 7/9 I-40026 Imola, Italy
FT-245
Class IIb: device
Class I: cart and arm
Device: Class I
Applied part: B
IP 20
4
905 nm
300 W
375W
100 ns
1.35 W
5 kHz - 10 kHz, with 1 kHz steps
10 kHz - 80 kHz, with 2 kHz steps
100% up to 40 KHz
75% from 42 to 60 kHz
40% from 62 to 80 kHz
1 s - 30 s, with 1 s steps
30 s - 1 min, with 5 s steps
1 min - 30 min, with 30 s steps
1 m
3R
635 nm
4 mW
23
7/9/2021 9:53:32 AM 7/9/2021 9:53:32 AM