Precautions For Glue, Glue Remover, And Ink Film Remover - Epson ML-13000 Safety Precautions

ML-13000 Safety Precautions
Precautions for Glue, Glue Remover, and Ink Film
Remover
Glue, glue remover, and ink film remover may contain organic solvents harmful to the human body.
Before carrying out work handling glue or remover, obtain a Safety Data Sheet from the manufacturer of that glue
or remover and thoroughly understand the contents thereof. Then, carry out work taking appropriate measures
and strictly following the laws and regulations of your region.
Seiko Epson Corporation will bear no responsibility whatsoever regarding the handling of glue, glue remover, and
ink film remover as well as any effects on health therefrom.
For Safe Usage
If ink gets on your skin or enters your eyes or mouth, take the measures below.
If it gets on your skin, rinse immediately with soap and water.
❏
If it enters your eyes, rinse immediately with water. Failure to observe this precaution
❏
could result in bloodshot eyes or mild inflammation. If problems persist, consult with a
physician.
If it enters your mouth, consult a physician immediately.
❏
Do not dismantle or remodel ink supply units.
Disassembling them can cause ink or cleaning liquid to get in your eyes or come in contact
with your skin.
Keep ink supply units, maintenance liquid, carriage spindle grease, waste ink, and glue out of
the reach of children.
Do not touch the IC chip on any ink supply unit.
Store ink supply units within the indicated temperature range. Do not store them in high or
freezing temperatures.
Dispose of used ink supply units according to local laws and regulations.
We recommend using genuine Epson ink supply units to ensure optimum performance from
this machine.
The use of non-genuine ink may cause damage that is not covered by Epson's warranties, and
under certain circumstances, may cause erratic printer behavior.
For more information about the warranty for this machine, see the Delivery Specifications or
the Sales Contract.
This machine is designed to stop operating before the ink completely runs out in order to
maintain the quality of the print head. Therefore, a small amount of ink will remain in used ink
supply units. The running cost will vary by usage environment and usage conditions.
WARNING
CAUTION
14